Reliable 350-401 Test Tutorial | 350-401 Official Practice Test
Our desktop Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) (350-401) practice exam software allows you to see your progress report at the end of each attempt. In this way, you find your mistakes and overcome them before the final take. Our desktop software is customizable so you can change the duration and Cisco questions of 350-401 Practice Tests according to your learning requirements. Since this software requires installation on Windows computers, you can take the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) (350-401) practice exam offline.
When you are studying for the 350-401 exam, maybe you are busy to go to work, for your family and so on. How to cost the less time to reach the goal? It’s a critical question for you. Time is precious for everyone to do the efficient job. If you want to get good 350-401 prep guide, it must be spending less time to pass it. Exactly, our product is elaborately composed with major questions and answers. We are choosing the key from past materials to finish our 350-401 Guide Torrent. It only takes you 20 hours to 30 hours to do the practice. After your effective practice, you can master the examination point from the 350-401 exam torrent. Then, you will have enough confidence to pass it.
>> Reliable 350-401 Test Tutorial <<
2025 Cisco 350-401: First-grade Reliable Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Tutorial
The Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) (350-401) study material of ActualVCE is available in three different and easy-to-access formats. The first one is printable and portable Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) (350-401) PDF format. With the PDF version, you can access the collection of actual Cisco 350-401 Questions with your smart devices like smartphones, tablets, and laptops.
Cisco 350-401 exam is divided into six domains, each of which covers a specific area of enterprise network technologies. These domains include architecture, virtualization, infrastructure, network assurance, security, and automation. Candidates are required to have a deep understanding of each domain to pass the exam successfully. 350-401 exam also requires hands-on experience with Cisco network technologies, including routers, switches, firewalls, and other network devices.
Cisco 350-401 certification exam, also known as Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR), is a comprehensive exam that tests the knowledge and skills required to implement and troubleshoot enterprise network infrastructure. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) certification is designed for network engineers, network administrators, and network architects who want to upgrade their skills and knowledge in enterprise networking. 350-401 Exam covers a wide range of topics, including network security, automation, virtualization, and network design.
Cisco 350-401 Exam is designed for network engineers, designers, administrators, and technicians with at least three to five years of experience in enterprise networking. It is an online, proctored exam that consists of about 90 to 110 questions, which must be answered within 120 minutes. The passing score for the exam is about 750 to 850 points, depending on the variation of the exam.
Cisco Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Questions (Q238-Q243):
NEW QUESTION # 238
Lab Simulation 1
Guidelines
This is a lab item in which tasks will be performed on virtual devices.
- Refer to the Tasks tab to view the tasks for this lab item.
- Refer to the Topology tab to access the device console(s) and perform the tasks.
- Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
- All necessary preconfigurations have been applied.
- Do not change the enable password or hostname for any device.
- Save your configurations to NVRAM before moving to the next item.
- Click Next at the bottom of the screen to submit this lab and move to the next question.
- When Next is clicked, the lab closes and cannot be reopened.
Topology
Tasks
BGP connectivity exists between Headquarters and both remote sites, however Remote Site 1 cannot communicate with Remote Site 2. Configure BGP according to the topology to achieve these goals:
1. Configure R2 under the BGP process to provide reachability between Remote Site 1 and Remote Site 2. No configuration changes are permitted on R1 or R3.
2. Ensure that the /32 networks at Remote Site 1 and Remote Site 2 can ping each other.
Initial Configs
(Note: Maybe there are two versions of this sim. In the first version, R2 cannot be accessible and unnecessary configs have been removed. We will solve this version first.)
If we use the "show ip bgp" command on R3 then we will see the Loopback0 interface of R1 is not learned since it is coming from same AS number 123.
Answer:
Explanation:
In order to allow same AS prefix to be received from eBGP neighbor and installed in BGP table, R1 can use the "allowas-in" command will as below:
R1(config)#router bgp 123
R1(config-router)#address-family ipv4
R1(config-router-af)#neighbor 10.0.0.2 allowas-in
Same configuration should be applied to R3:
R3(config)#router bgp 123
R3(config-router)#address-family ipv4
R3(config-router-af)#neighbor 192.168.1.2 allowas-in
Note: In the second version of this sim, only R2 can be accessible so the above commands cannot be applied to R1 & R3. In that case we have to use "as-override" on R2 as follows:
R2(config)#router bgp 456
R2(config-router)#address-family ipv4
R2(config-router-af)#neighbor 10.0.0.1 as-override
R2(config-router-af)#neighbor 192.168.1.3 as-override
With "as-override" configured, R3 would accept routes advertised from R1 (and vice versa) as the AS 123 was replaced by AS 456 in the AS_PATH. R3 will see the AS_PATH "456 456 i" (instead of "123 456 i"). Since the AS_PATH does not contain its own AS number so it accepts the advertised routes.
You can practice this version (AS-Override) with our own simulator at BGP Configuration online simulator v2. This version does not work with EVE-NG as AS-Override feature requires a VRF so we did not create a lab file in EVE-NG.
Verification
R1,R3#show ip bgp -> see Loopback0 of remote routers.
R1 must ping Loopback0 of R3 successfully.
Save the configuration
Don't forget to save the configuration on R1 & R3
R1, R3#copy running-config startup-config
In the second version, only R2 was configured so save its configuration: R2#copy running-config startup-config
NEW QUESTION # 239
Which control plane protocol is used between Cisco SD-WAN routers and vSmart controllers?
Answer: C
NEW QUESTION # 240
Refer to the exhibit.
Refer to the exhibit. What is the effect of this configuration?
Answer: C
NEW QUESTION # 241
Refer to the exhibit.
The network administrator must be able to perform configuration changes when all the RADIUS servers are unreachable. Which configuration allows all commands to be authorized if the user has successfully authenticated?
Answer: B
Explanation:
The correct configuration to allow all commands to be authorized if the user has successfully authenticated when all RADIUS servers are unreachable is option C, which is aaa authorization exec default group radius if-authenticated. This command specifies that if a user has been authenticated, then they should be authorized to execute all commands in the absence of any reachable RADIUS servers. It's a fallback mechanism that ensures users retain command execution privileges even when the RADIUS server cannot be contacted.
NEW QUESTION # 242
Refer to the exhibit.
Which command set must be applied on R1 to establish a BGP neighborship with R2 and to allow communication from R1 to reach the networks?
A)
B)
C)
D)
Answer: C
NEW QUESTION # 243
......
If you also want to work your way up the ladder, 350-401 test guide will be the best and most suitable choice for you. If you are still hesitating whether you need to take the 350-401 exam or not, you will lag behind other people. If you do not want to fall behind the competitors in the same field, you are bound to start to pay high attention to the 350-401 Exam, and it is very important for you to begin to preparing for the 350-401 exam right now. Just come and buy our 350-401 exam questions as the pass rate is more than 98%!
350-401 Official Practice Test: https://www.actualvce.com/Cisco/350-401-valid-vce-dumps.html